PARTLOW帕特罗 调节器 程式器 1160+详解
The MIC 6000 is a 1/4 DIN, microprocessor based, single
loop, profiling, process controller. It can function
either as a basic process controller, utilizing manual
setpoint changes or it can also execute any one of eight
setpoint profiles; each profile can have six ramp and
six soak segments. Standard Features
Dual setpoints with optional remote selection
Plug-in output modules installing just the
functions needed
NEW Improved HMI; four button operation, dual
4-digit LED displays
4 per second input sample rate
Universal input
Full PID or ON/OFF control
Heat/Cool operation (with dual outputs ordered)
Selectable pre-tune, self-tune, manual tune
Ramping setpoint
Process and Loop alarms
NEW Jumperless input configuration
NEW Auto-detection of installed output modules
NEW Improved PC configuration software (comms
option not required)
Construction / Enclosure: Rugged ABS Plastic
housing
Environmental Characteristics
Operating Temp.: 32° to 131°F (0° to 55°C)
Storage Temp.: –4° to 176°F (–20° to 80°C)
Humidity: 20% to 95% non-condensing RH
Electrical
Supply Voltage: 100-240V 50/60Hz; optional 24VDC
(20-48VAC / 22-65 VDC)
Power Consumption: 5W / 7.5VA max
Inputs
T/Cs: J, K, C, R, S, T, B, L, N and Pt 20% Rh vs.
Pt 40% Rh
RTD: 3-wire; PT100; 50Ω per lead maximum
(balanced)
DC Linear:
(scalable –1999 to +9999) Volts: 0–5, 1–5, 0–10 or
2–10 VDC
DC milliamps: 0–20mA or 4–20mA
DC millivolts: 0–50, 10–50mV
Outputs
All output types are user-selectable and
customizable based on desired application; choose
from the following output types:
Max. # of Outputs: Three for control, alarm, 24VDC
transmitter power supply or retransmit of process
value or setpoint
Relay: Optional SPDT; 240VAC 2.0A resistive.
Lifetime: >500,000 operations at rated voltage /
current
SSR Driver: Optional drive capability: >10VDC
nominal into 500Ω minimum
DC Linear: Optional 0–20mA , 4–20mA into 500Ω
max.; 0-10V, 1-5V, 2-10V, 0-5V into 500Ω minimum;
control outputs have 2% over/under drive applied;
accuracy ±0.25% (mA into 250Ω load, V into 2kΩ
load); degrading linearly to ±0.5% for increasing
burden to specified limits
Triac: Optional 0.01 to 1A AC, 20 to 280Vrms,
47–63Hz (limit 2)
Transmitter Power Supply: Optional 24VDC (limit 1)
Output Functions
All output functions are user-selectable and
customizable based on the application:
Heat Power
Cool Power
Process Alarm: reverse or direct
Modes (Alarms 1 and 2): High/low, SP deviation,
band, logical OR/AND
Loop Alarm reverse or direct
Retransmit setpoint or process value
Electrical Performance
Accuracy: ±0.1% of input range ±1 LSD (T/C CJC
better than 1°C)
Input Sample Rate: 4 per second; 14 bit resolution
Impedance: >10MΩ for thermocouple and mV ranges,
47kΩ for V ranges and 5Ω for mA
Sensor Break Detection: <2 seconds (except zero
based DC ranges), control O/Ps turn off, high
alarms activate for T/C and mV ranges, low alarms
activate for RTD, mA or V ranges
Communications Interface
User-selectable: 2-wire, RS-485 serial
communications option with choice of Modbus® or
ASCII protocol; 1200 to 19,200 baud
PC Configuration: Off-line configuration from
serial port to dedicated configuration socket
(comms option not required)
Ratings / Agency Approvals
Safety: CE, UR, cUR, UL file #E67237
EMC: Certified EN61326
Other: ISO 9002 registered
Protection
IEC IP66; NEMA 4X (front panel)
IEC IP20 (behind the panel protection)
Physical Dimensions
Panel Cutout: 100-240V 50/60Hz; optional 24VDC
(20-48VAC / 22-65 VDC)
Width: 1.89" (48mm)
Depth: 4.33" (110mm)
Height: 1.89" (48mm)
Weight: 0.46 lbs (0.21kg)
Mounting: Plug-in with panel mounting fixing strap
Options / Accessories
NEW Faster RS-485 serial communication speeds and
user-selectable (Modbus® or ASCII) option
NEW 24VDC transmitter power supply option
Digital Input 1 (optional): Selects between two
setpoints or auto/manual tune control; volt free
or TTL input
Basic Remote Setpoint Input (optional): 0-20mA,
4-20mA, 0-10V, 2-10V, 0-5V; scalable - 1999 to
9999; local or remote setpoint selected from front
panel
Choice of LED colors: red/red, red/green,
green/red, green/green; plus five indicators
10VDC SSR Drive output
PARTLOW帕特罗 调节器 程式器 1160+详解